NewsExplainer
There are boundaries at sea too. Check port areas, routes, and training areas on the map
Over the sea, too, there are invisible boundaries: port areas under the Port Regulations Act, statutory routes, and exercise and training areas. DroMap shows these areas in color over the water, based on data from Umishiru (Japan Coast Guard).
It is easy to assume you can fly freely over the sea, but the sea has invisible boundaries too. Based on data obtained through the API of Umishiru (Japan Coast Guard), DroMap shows three kinds of sea information on the map: port areas under the Port Regulations Act; statutory routes under the Port Regulations Act and the Maritime Traffic Safety Act; and exercise and training areas of the Japan Self-Defense Forces (JSDF), US forces, and others. DroMap treats these not as drone regulations themselves but as safety reference information for flying over the sea. In the check result they are shown as reference information, separately from the DID and Flight Prohibition Act checks.
A port area under the Port Regulations Act is a zone inside a harbor where vessel traffic is concentrated. For these, the check result shows: “This is a port area under the Port Regulations Act. It is not a drone regulation as such, but it is a key point for vessel traffic, so we recommend checking with the port authority and the responsible Coast Guard office in advance.” For statutory routes, it says: “This is a statutory route with heavy vessel traffic. Take care that low flight over the water does not obstruct navigation.” For exercise and training areas, it says: “These are training waters used by the JSDF and US forces. Entry and operations are restricted with advance notice when in use, so avoid flying here.”
To check on the map, open the layers panel from the “Layers” button (on a smartphone, it is among the buttons at the top right of the screen) and make sure the “Port areas (Port Regulations Act)”, “Maritime routes”, and “Exercise & training areas” layers in the “At sea” group are on (all are on by default). With these on, tap a sea area and the result sheet shows the notice above along with names such as the port name (up to two; more than that are shown as “and others”). For port areas, the contact details of the Coast Guard office or station with jurisdiction over that port may also be shown.
This sea data is obtained through the API of Umishiru (Japan Coast Guard) and periodically converted by DroMap into map data. It therefore may not always match the latest official notices exactly, and last-minute changes or temporary restrictions may take time to appear. As required by the terms of use of the data, the source, “Umishiru (Japan Coast Guard),” is credited in the sources display (ⓘ) at the bottom left of the map.
These sea-area displays are safety reference information. They do not determine whether a specific procedure or application under the Port Regulations Act, the Maritime Traffic Safety Act, or similar laws is required, or what its deadline is. Before flying over the sea, always check in advance with the Coast Guard office or port authority with jurisdiction, and with official sources such as DIPS 2.0 (MLIT’s online drone application system).
This is an English translation of the Japanese original. If the two versions differ, the Japanese version prevails.